Chattanooga Elite Metal Roofing - Standing Seam, Metal Shingles & Metal Roof Replacement and Repair

Metal Roofing Contractor in Chattanooga, TN

Chattanooga Elite Metal Roofing installs, replaces and repairs metal roofs across Chattanooga and Hamilton County.

Typical cost: $12,000 to $35,000 for most full homes, depending on roof size, pitch and panel type.

Timeline: most homes are done in 2 to 5 working days once materials arrive.

Styles: standing seam, metal shingles, stone-coated steel, R-panel, corrugated, aluminum and copper.

Lifespan: 40 to 70 years, versus roughly 15 to 25 for architectural shingles.

Quotes: free inspection and a written, itemized quote before any work starts.

Our honest take: if you plan to stay in your home more than ten years, metal usually wins on lifetime cost. If you're selling next spring, we'll tell you that too.

Get a FREE Quote

Free Written Quote

Inspection photos plus an itemized price

$12k to $35k Typical

Cost for most full homes

Done in 2 to 5 Days

Once materials arrive

40 to 70 Year Lifespan

2 to 3 times longer than shingles

Hamilton County Wide

Plus nearby North Georgia

Residential Metal Roof Installation & Replacement in Chattanooga

Most homes we roof in Chattanooga go one of three ways: standing seam for the best long-term roof, metal shingles or stone-coated steel for a traditional look, or exposed-fastener panels to keep the budget down. Here's every option we install.

Standing seam metal roof installation in Chattanooga, TN

Standing Seam Metal Roofs

Standing seam is the premium metal roof: concealed fasteners, raised seams and panels that run ridge to eave in one piece. With no exposed screws to back out, it's the lowest-maintenance roof we install. Most Chattanooga homeowners choose 24- or 26-gauge steel with a Kynar 500 (PVDF) finish that holds its color for decades. Think of it as buying your last roof: more up front, almost nothing to maintain afterward.

Metal shingle roof in Chattanooga, TN

Metal Shingles

Metal shingles give you the look of slate, shake or architectural shingles with the lifespan of steel. The panels interlock on all four sides, so they hold up to the gusty storms that roll through the valley. They're a good fit in neighborhoods like Signal Mountain and Riverview, where a classic look matters but you don't want to re-roof again in 20 years.

Stone-coated steel roofing in Chattanooga, TN

Stone-Coated Steel Roofing

Stone-coated steel bonds stone granules to steel panels, so it looks like tile, shake or shingle and stays quieter in rain than bare metal. The stone layer hides small dents and handles hail better than most roofs, which counts in a city that sees spring thunderstorms every year. In our opinion, it's the best pick when an HOA or a historic street wants a traditional look.

R-panel and 5V crimp metal roofing in Chattanooga, TN

R-Panel & 5V Crimp Metal Roofing

R-panel and 5V crimp are exposed-fastener panels. They cost less than standing seam and go on faster, which makes them a solid pick for budget re-roofs, cabins, shops, porches and outbuildings. The trade-off is upkeep: the screws are visible and their rubber washers age, so plan on checking them every 10 to 15 years. On a simple ranch roof, this is often the most affordable way to get out of shingles for good.

Corrugated metal roofing in Chattanooga, TN

Corrugated Metal Roofing

Corrugated metal brings a rustic, farmhouse look and is one of the most affordable metal options. The wavy profile sheds water fast and works well on low-slope porches, barns, sheds and accent roofs. We pair it with matching trim and closure strips so wind-driven rain, birds and wasps stay out of the gaps.

Metal roof on a home in Chattanooga, TN

Metal Roof Over Shingles

Often we can install metal right over one layer of existing shingles, which saves tear-off and dump fees and keeps your yard cleaner. Where it's needed, we add a moisture barrier and furring strips so the old roof can't trap water. We inspect the decking first, and if it's soft or there are already two layers, we'll tell you straight that a full tear-off is the better call.

Galvalume metal roof in Chattanooga, TN

Galvalume & Painted Steel Roofing

Galvalume is steel coated in aluminum and zinc: the value pick with a clean, industrial look that suits modern farmhouses. The coating protects the steel from rust far longer than plain galvanized panels. Painted steel adds color and an extra layer of corrosion protection for homes, shops and barns. If you like the bare-metal look and want to keep costs down, Galvalume is hard to beat.

Copper standing seam metal roof in Chattanooga, TN

Aluminum & Copper Roofing

Aluminum won't rust, so it's the right call for homes near Chickamauga Lake, Nickajack Lake and the Tennessee River, where moisture hangs around. It's also lighter, which helps on older framing. Copper is the luxury option for bay windows, porches and historic homes in neighborhoods like St. Elmo and North Shore, and it weathers from bright penny to a natural brown and green patina.

Metal roof colors and finishes in Chattanooga, TN

Metal Roof Colors & Finishes

We carry dozens of colors, from charcoal and matte black to barn red, forest green and light "cool roof" finishes that reflect summer heat away from your attic. We bring samples to your house so you can see them against your brick, siding and trim in real daylight, not on a phone screen. In our opinion, dark bronze on a red-brick home is hard to beat.

Commercial Metal Roofing & Metal Roof Repair

Businesses, churches and farms need a roof that keeps working without constant callbacks. We handle new commercial metal roofs, retrofits over old roofs and leak repairs on metal roofs of any age.

Commercial metal roofing in Chattanooga, TN

Commercial Metal Roofing

We install standing seam and structural panel systems on warehouses, offices, churches, restaurants and retail buildings across Hamilton County. Many commercial roofs can be retrofitted right over the existing roof, which keeps your business open and avoids tear-off costs. We schedule the noisy work around your hours and keep the site clean so customers can still get in the door.

Metal roof leak repair in Chattanooga, TN

Metal Roof Leak Repair

Most metal roof leaks come from three places: loose or failed screws, worn sealant at flashings and pipe boots, and bad trim details at valleys and walls. We find the actual source instead of smearing caulk over the symptom, and we show you photos of what we found. Many leaks are a same-day fix; if a panel itself is damaged, we replace it with a matching profile.

Barn metal roof replacement near Chattanooga, TN

Barns, Shops & Pole Buildings

R-panel and 5V crimp re-roofs for barns, workshops, pole buildings and agricultural buildings across the Tennessee Valley. We can match existing panel profiles, add clear skylight panels for natural light, and install ridge vents so hay and equipment stay dry without condensation dripping from the purlins.

Specialty Metal Roof Services in Chattanooga

Not every roof needs replacing. These services fix the problem in front of you and protect the roof you already paid for.

Metal Roof Coating & Painting

Faded panels or surface rust on a sound roof? A silicone or acrylic restoration coating, or a repaint, can add 10 or more years for a fraction of replacement cost. We clean, treat the rust, replace bad screws and seal the seams first, because a coating is only as good as the prep underneath it.

Screw & Fastener Replacement

Rubber washers dry out and crack in the Tennessee sun. Swapping in oversized, longer-life screws is one of the cheapest ways to stop leaks on an older exposed-fastener roof. Think of it like new tires on a good truck: the roof is fine, the small parts wore out.

Hail & Storm Damage Inspections

After a storm we document dents, seam damage and loose fasteners with photos you can hand to your insurance adjuster. We'll tell you honestly whether the damage is cosmetic or something that will leak, so you can decide whether a claim makes sense.

Underlayment & Insulation for Metal Roofs

High-temp synthetic underlayment and proper ventilation keep a metal roof quiet and help stop condensation in our humid summers. Solid decking under the panels is what makes a metal roof sound like any other roof in the rain, not a tin shed.

Gutters for Metal Roofs

Metal sheds water fast, and it can shoot right past undersized gutters. We size gutters and downspouts for the flow, add splash guards where valleys dump water, and install leaf guards where trees hang over the roof.

Carports, Porches & Patio Covers

Small metal roofs done right, with proper flashing where they meet the house so they don't become your next leak. We match the color and panel of your main roof so the porch looks like it was always part of the house.

Why Choose Our Chattanooga Metal Roofing Contractors

Metal Roofing Is All We Do

A general roofer installs metal a few times a year. Our crews install standing seam, metal shingles and exposed-fastener systems every week, so details like ridge vents, valley flashing and pipe boots are routine, not guesswork.

Panels Cut to Fit Your Roof

We measure on site so panels run full length from ridge to eave. You won't be left with short, field-patched pieces and extra seams, which are the spots most likely to leak years from now.

Written, Itemized Quotes

Panel type, gauge, color, underlayment, trim and tear-off are all listed with prices. You can compare our quote line by line against anyone else's and know exactly what you're paying for before work starts.

Built for Chattanooga Weather

More than 50 inches of rain a year, humid summers and spring storms with hail and high wind. We pay extra attention to fastener spacing, high-temp underlayment and sealed flashing, especially on Signal Mountain, Lookout Mountain and Missionary Ridge, where the wind hits harder.

Clean Job Sites

Magnetic sweeps for screws and metal shavings every day, tarps over landscaping, and a final cleanup before we leave. Your driveway, lawn and bare feet should never find a stray screw.

Free Inspection With Photos

We photograph your decking, flashing and existing roof and walk you through what we found. You get an honest opinion on whether you need a new roof, a repair or nothing at all yet.

Our Metal Roof Installation Process

Step 1: Free Metal Roof Inspection

We check your decking, ventilation and existing roof, take photos, and talk through which metal system fits your home, your budget and how long you plan to stay. Most inspections take under an hour.

Step 2: Written, Itemized Quote

Panel type, gauge, color, underlayment, trim and tear-off are all listed with prices, so you can compare apples to apples. If storm damage is involved, we document it with photos for your insurance adjuster. No pressure and no "today only" pricing.

Step 3: Tear-Off or Overlay & Metal Roof Installation

Our crew removes the old roof or prepares it for an overlay, installs high-temp synthetic underlayment, then sets panels, trim and flashing. Panels are made to length for your roof. Most homes take 2 to 5 working days once materials arrive, weather permitting.

Step 4: Final Walkthrough, Cleanup & Warranty

We walk the roof with you, run a magnetic sweep for screws and shavings, and hand over your manufacturer and workmanship warranty paperwork, along with photos of the finished roof.

Metal Roofing Materials We Use

Steel Gauge: 24 vs. 26 vs. 29

Gauge is steel thickness: the lower the number, the thicker the panel. We recommend 24 or 26 gauge for homes. 29 gauge is fine for sheds and barns but dents more easily, a bit like the difference between a cookie sheet and a cast-iron pan.

Paint Finishes: Kynar 500 vs. SMP

Kynar 500 (PVDF) paint holds its color and resists chalking for decades and usually carries the longest paint warranties. SMP costs less and works well on shops and barns but fades sooner. On a house you plan to keep, we think PVDF is worth it.

Concealed Clips & Fasteners

Standing seam panels attach with hidden clips that let the steel expand and contract through hot afternoons and cool nights. On exposed-fastener roofs we use longer-life screws, sized to bite into solid wood, not just the sheathing.

Synthetic Underlayment

We use high-temperature synthetic underlayment, not old felt paper. It won't wrinkle or tear in summer heat, it sheds water if a storm rolls in mid-job, and it's rated for the heat that builds up under metal panels.

Trim, Flashing & Ridge Vents

Most leaks start at the edges, not the panels. We use trim and flashing in the same color and gauge as your roof, and vented ridge caps so hot, humid attic air can escape instead of rotting the decking.

Pipe Boots & Penetrations

Plumbing vents, chimneys and skylights are where a metal roof is most likely to leak. We use high-temp silicone pipe boots and proper flashing around every penetration instead of relying on a tube of caulk.

How Much Does a Metal Roof Cost in Chattanooga?

Most full residential metal roofs in the Chattanooga area land between about $12,000 and $35,000. Typical installed prices per square foot are in the table; your written quote will be exact.

What moves the price most:

Roof size and pitch: a steep roof with dormers and valleys takes more labor and trim than a simple gable.

Panel system: exposed-fastener panels sit at the low end; standing seam, aluminum and copper at the top.

Tear-off: removing one or two layers of shingles adds labor and disposal fees.

Decking repairs: soft or rotted plywood gets replaced before any panels go on.

Metal Roof vs. Shingles

Shingles cost less up front. A metal roof typically lasts two to three times as long, handles high wind better and can lower summer cooling bills with reflective colors. Over 30 years, many homeowners spend less on one metal roof than on two shingle roofs. If you're staying put, metal is usually the smarter buy; if you're moving within a few years, new shingles may make more sense, and we'll say so.

Roofing Type
Typical Cost Range

Exposed-Fastener (R-Panel, 5V)

$5 - $10 / sq ft

Corrugated Metal

$5 - $9 / sq ft

Metal Shingles

$8 - $14 / sq ft

Stone-Coated Steel

$9 - $15 / sq ft

Standing Seam Steel

$10 - $16 / sq ft

Aluminum or Copper

$12 - $35+ / sq ft

Serving Chattanooga & Surrounding Areas

Chattanooga, Hixson, Red Bank, East Ridge, Signal Mountain, Lookout Mountain, Ooltewah, Collegedale, Soddy-Daisy and East Brainerd, plus nearby Rossville and Fort Oglethorpe, GA.

From older homes in St. Elmo and North Chattanooga to newer subdivisions in Ooltewah and East Brainerd, every part of town needs something a little different. Mountain homes get more wind, lake and river homes deal with more moisture, and historic streets often want a traditional look. We plan each metal roof around where your house actually sits, not a one-size-fits-all spec sheet.

Metal Roofing FAQs

Is a metal roof loud in the rain?

Not with solid decking and proper underlayment. Most people hear about the same as with shingles. The "tin barn" sound comes from panels screwed onto open purlins with nothing underneath, which isn't how we roof a house. Stone-coated steel is the quietest metal option.

Will a metal roof attract lightning?

No. Metal doesn't make a strike more likely; lightning goes for the tallest point, not the material. And because metal is noncombustible, it won't catch fire if lightning hits nearby, which is one reason many insurers like it.

Can you install a metal roof over my shingles?

Often, yes, over one layer of shingles in good condition. It saves tear-off and dump fees. We inspect the decking first and recommend a full tear-off if there's rot, soft spots or more than one layer already on the house.

How long does a metal roof last?

Typically 40 to 70 years, depending on the panel system, steel gauge and paint finish. Exposed-fastener roofs need new screws every 10 to 15 years; standing seam needs very little upkeep beyond keeping gutters and valleys clear.

Does a metal roof lower energy bills?

It can. Light-colored and reflective cool-roof finishes bounce back much of the summer sun, which keeps attics cooler and eases the load on your AC during a Chattanooga July. Pair it with good attic ventilation for the biggest difference.

Can you repair an existing metal roof?

Yes. We replace failed screws with longer-life fasteners, reseal flashings and trim, fix leaks at valleys and walls, and can coat or repaint faded panels to add years of life. If a repair isn't worth the money, we'll tell you before you spend it.

How much does a metal roof cost in Chattanooga?

Most full homes land between about $12,000 and $35,000. Exposed-fastener panels sit at the low end, standing seam and copper at the top. Roof size, pitch, tear-off and decking repairs move the number most. Your free inspection ends with a written, itemized quote.

Is standing seam worth the extra cost?

If you plan to stay in your home for ten years or more, usually yes. There are no exposed screws to maintain, the finish holds its color for decades and it adds curb appeal at resale. For a shop, cabin or tight budget, exposed-fastener panels are often the smarter buy.

Can a metal roof handle hail?

Metal resists hail better than most roofs because it won't crack or lose granules. Large hail can leave dents, mostly cosmetic. Stone-coated steel hides dents best, and many manufacturers sell panels rated to the highest impact class, Class 4.

Will a metal roof affect my homeowners insurance?

Many insurers offer lower premiums for impact-rated or noncombustible roofs, but it varies by company and policy. Ask your agent before you choose a panel. We can give you the product specs and ratings they ask for.

How long does a metal roof installation take?

Most homes take 2 to 5 working days once materials arrive. Panels are made to length for your roof, which usually takes a week or two to order. Complex roofs with many valleys, dormers or a full tear-off take a little longer.

Get a Free Metal Roof Inspection & Written Quote in Chattanooga

Tell us about your roof and we will come out, take photos and give you a written, itemized quote. No pressure, just straight answers about what your roof needs.